3L STEEL SINGLE 232 B

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

ERON D-1 FOR SUEX DPV

Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)

1.5 L ALUMINIUM CYLINDER W/1 EXIT VALVE 232 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

BUNGEE MOUNT FOR VYPER/GEKKO/VYTEC

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. - Snap in fit.For Vyper/Gekko/Vytec Suunto Computers

BUNGEE MOUNT FOR UWATEC COMPASS

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. - Snap in fit.For Uwatec Compass.

BUNGEE MOUNT FOR SK7

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. Snap in fit. For Suunto SK7 Compass.

1.5 L ALUMINIUM ARGON CYLINDER W/M25 VALVE

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

BUNGEE MOUNT FOR ALADIN PRIME & DIGITAL GAUGE

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. Snap in fit. For Aladin Prime Computer.

0,8 L ALUMINIUM ARGON CYLINDER W/ M25 VALVE

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

90° LP SWIVEL

90 ° swivel elbow male thread UNF 3/8 "(LP) to female UNF 3/8" (LP). It enables optimal routing hoses.

DRYBASE TOP UNDERSUIT

Designed with a looser fit, this top can be worn on the way to the dive and then worn as part of a layering system next to the skin. Flat seams make the top very comfortable and the wicking fabric keeps the skin warm and dry. Wear underneath your everyday clothes prior to the dive, and then there is no need to get changed completely, thus helping you to stay warmer beforehand.

DRYBASE LEGGINS UNDERSUIT

A high performance alternative to cotton underwear, these leggings provide enhanced thermal protection and keep the skin drier an more comfortable during the dive. A high waist, wide elasticated waistband and flat seams throughout maximise next to skin comfort.

ARCTIC 2 PIECES UNDERSUIT

The Arctic's two layers of high insulation, low bulk fabric, ensure exceptional levels of thermal protection. Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer fitting neoprene drysuits. In a layering system , the Arctic is also suited for use underneath membrane and trilaminate suits

TRIESTE WING 94 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

HALO 3D UNDERSUIT

Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.

PERFORMANCE WING 32 LB SINGLE

The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.

PERFORMANCE WING 45 LB DOUBLE

The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Donut configuration allows air to travel from one side of the air cell to the other easily, this reduces the possibility of air trapping on one side of the wing.

TRIESTE WING 60 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.